|
Details
The integral inductive loop is part of a communication system and is used with an inductive in-ear receiver.
The inductive loop consists of a reception unit， a PTT button (PTT: push to talk)， an inductive coil and an integral omni-directional microphone. Covert communication between 2 way radio and wireless earpiece can be carried out via this loop.
Wireless PTT uses water proof high quality material. It is typically used for 2-way radio PTT concealed remote control. It looks like car remote control and is convenient to applications under specific circumstance.
Adaptor & Inductive Loop
Color beige
Impedance ≥40Ω( Freq : 300Hz to 1KHz )
≥130Ω( Freq > 5KHz )
Length 65cm
Max input signal 3.5Vrms
Power supply Duel power supply (from radio or batt)
Supply Voltage 3.3V 至 10V
Microphone
Type Omni directional electret
Impedance 4.4KΩ at 1KHz
Sensitivity @1KHz (dB re 1.0V/0.1Pa) -53.0±2dB
Frequency response 100Hz to 10KHz
Max current output 50uA
Supply voltage 1.5V - 10V
Operation temp -10℃ to 60℃
PTT Key
Switching cycles >100000
Wireless PTT
Technic NFMI
Battery type CR2450
Battery lift time min 1 year
Operation range 60cm to 150cm
Volume Control 6 steps
PTT Button cycles >100000
Battery low alert LED
Pairing method Manually operation
Waterproof IP67
Wearing Photo
|
